[南京]西门子数控(南京)有限公司2011招聘

发布时间：2011-04-21
工作地点：南京
信息来源：浙江大学
职位类型：全职
职位描述
西门子数控(南京)有限公司





用人单位行业：仪器仪表及工业自动化
用人单位规模：500人以上
用人单位类型：合资

招聘开始时间:2011-04-20 招聘截止时间:2012-05-31 点击率:7

职位名称 工作地点 学历要求 招聘人数(人) 操作

1 系统测试工程师(工业控制及驱动) 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：系统测试工程师(工业控制及驱动) System Test Engineer 工作地点：南京 Mission: Design test method and test system and preform test for Drive/inverter/servo motor Job Description: 1. Understand product requirement, feature specification and design documents, create test cases and make test plan for the product including cost/effort estimation. 2. Design and set up test system in a proper way. 3. Make test program and implement test according test plan, make necessary record and archive for all test data. 4. Responsible for release the product for R&D according to test result analysis. 5. Work according to test management process and lab management regulation. 6. Create new test method to continue improvement, e.g. create automation test to improve test coverage and repeatability. Qualifications: 1. Bachelor or above, major in automatic control, electronics or communication related 2. Knowledge of control principle, application experiences of drive and servo motor. 3. Customer support or development experiences is preferred

职位名称 工作地点 学历要求 招聘人数(人) 操作

2 硬件工程师 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：硬件工程师(控制电路或功率电路) Hardware Engineer 工作地点：南京 Mission: A HW Electrical engineer has a deep understanding of the development especially electrical know-how, processes, tools such as Menter, CR5000 and CADIM needed in their working field. He is solving development tasks assigned to them independently in the desired quality and according to the agreed upon deadline. Job Description: 1. HW function realization refers to project requirements. (realization of work package) 2. HW function verification and testing, related review in order to meet the project requirement. 3. Independent execution of the tasks assigned to him in time. 4. Responsible for electrical schematic design, PCB routing instruction, cost and effort estimation, (Design of work package) 5. Result documentation and transfer of work package. Qualifications: 1. Knowledge on PLC or Motion control 2. Processes relevant for HW department, PLM processes specially the interface to HW development 3. Good at English or German.

职位名称 工作地点 学历要求 招聘人数(人) 操作

3 电机电磁设计工程师 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：电机电磁设计工程师 Electro-Magnetic Design of PMSM 工作地点：南京 Mission: Responsible for design of magnetic circuit and windings Job Description: 1. Electromagnetic product support regarding Permanent-Magnet Servomotors 2. Product development, design to cost and design to manufacturing regarding electro-magnetic aspects 3. Responsible for estimating the effect on motor specific values due to modifications on design and manufacturing process 4. Support of production regarding electro-magnetic motor characteristics 5. Responsible for motor data sheet for customers and info documents for production of motor active parts and windings. 6. Production accompanying tests and analysis in terms of production support 7. Contact person regarding electro-magnetic aspects for production, product management, sales, procurement, etc. Qualification: 1. Successfully completed university education, with a (master) degree in electrical engineering 2. Electro-magnetic design and operation of three-phase permanent-magnet servomotors 3. Analytical electromagnetic calculations, electrical dimensioning and estimation of specific values for motors 4. Testing of inverter supplied permanent-magnet servomotors 5. Experience with international companies or in international projects desirable 6. Good at English or German.

职位名称 工作地点 学历要求 招聘人数(人) 操作

4 结构设计工程师 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：结构设计工程师 Mechanical Design Engineer 工作地点：南京 Mission: Deep understanding of the development know-how especially in mechanical design, processes, and tools needed in their department. He is solving development tasks assigned to them independently in the desired quality and according to the agreed upon deadline. Job Description 1. Independent execution of the assigned tasks and document them with high quality 2. Implement mechanical design and development for new products 3. Estimate work package efforts and schedule for mechanical design 4. Support material team in technical side 5. Internal support, product care after the product released. Qualifications: 1. Bachelor degree or above, major in mechanical or related. Master preferred; 3. Background/Experience in Mechanical Construction Design; 4. Comprehensive knowledge in Plastic design; 5. Experienced in metal sheet, electrical-mechanical components and die-casting part design; 6. Experience with Pro/E or UG; 7. Good at English or German.

职位名称 工作地点 学历要求 招聘人数(人) 操作

5 电机结构设计工程师 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：电机结构设计工程师 Mechanical Design Engineer of Motor 工作地点：南京 Mission: Structural design and development of a new servomotor series Job Description: 1. Preparation, testing and implementation of design elements 2. Definition and optimal integration of bought-in parts into the motor design 3. Consideration of known production technologies and bought-in parts in the design 4. Creation of technical drawings, supplier specifications and customer documentation 5. Creation of inspection and test plans for the attainment of design verification 6. Performance of design adjustments in order to meet customer-specific requirements and provision of support for the preparation of bids 7. Performance of technical changes 8. Assessment, evaluation and processing of technical complaints for sustained quality optimization Qualifications: 1. Design and operation of three-phase permanent-magnet servomotors 2. Specialized knowledge of design engineering, machine elements and materials application 3. Mechanical stress analyses, form and position tolerance analyses 4. Structural design of aluminum die cast and plastic parts 5. Motor standards 6. Use of CAD software, preferably Pro/ENGINEER or Unigraphics NX 7. FMEA 8. Good MS-Office skills

职位名称 工作地点 学历要求 招聘人数(人) 操作

6 投简历

职位描述：

职位名称 工作地点 学历要求 招聘人数(人) 操作

7 软件工程师 江苏省南京市江宁区 本科及以上 1 投简历

职位描述： 招聘职位：软件工程师(工业控制及驱动) Software Engineer 工作地点：南京 Mission: Responsible for quality, functionality and schedule of the work package assigned to him/her. Job Description: 1. Estimate and plan the effort for his/her SW work package 2. Derive SW features from the product requirements 3. Design, realize and test his/her SW work package independently, align with and even contribute to the overall SW architecture. 4. Actively communicate/coordinate with other SW team members to reach the overall project target. Qualifications: 1. Language in C, C with OOD, OOP concept; 2. Experienced in engineering tool development for PLC. Better to have knowledge / background in Automation or Numeric control domain and the instances of these domain products can be PLC, Drive, HMI, NC, etc. 3. Better to have knowledge in the different SW development phases like define, design, implementation and test. 4. Good at English or German.

用人单位简介

西门子数控（南京）有限公司 (SNC)建立于1996 年的西门子数控（南京）有限公司（SNC）是西门子公司与中国北方工业集团公司共同出资组建的合资企业。西门子公司是世界上最大的技术领先的电子电气公司之一，中国北方工业集团公司是涉及众多领域业务的中国最大集团之一。
自 SNC 成立以来，合作双方都致力于使其成为工厂自动化领域和机床控制系统的优秀供应商。SNC 的神圣使命是按照中国、东南亚地区及世界市场的特殊要求，依照世界级质量标准，研发和制造工厂自动化领域的数控系统、驱动器、人机对话界面及可编程逻辑控制器等产品。经过良好培训、高效率及有竞争能力的SNC 员工已成功地全面开展业务，SNC 愿竭诚为广大国内外及业内外客户提供高新技术产品和优质服务。
西门子全球网络提供电子工程及电气领域世界级的解决方案，西门子全球销售网络是我们产品出口的坚强后盾，西门子（中国）有限公司负责SNC 产品的中国市场销售，西门子工厂自动化工程有限公司及西门子工业自动化有限公司负责产品的售后服务，公司所有的出口产品由西门子全球服务机构负责维护。所有这些优势已与西门子工业自动化与驱动技术集团的发展, 制造及服务网络融为一体。SNC已成为IA&DT 在中国的电子中心及所有中国和世界客户的可靠合作伙伴。SNC以客户为中心。从研发初期考虑客户需要来定义产品，到售后服务，我们致力于在任何时候最大程度地满足客户需求。只要与我们的中国客户联合起来，我们一定会在中国的工厂自动化领域名列第一。

主要产品:
SINUMERIK
简易车床的理想方案:SINUMERIK 801
高品质经济型机床数控系统:SINUMERIK 802S base line
最具潜力高品质的普及型数控系统:SINUMERIK 802C base line SIMODRIVE611U
历久弥新的加强型全数字机床数控系统:SINUMERIK 802D solution line
紧凑型数控系统中的集大成者：SINUMERIK 828D

工业自动化产品 AS
工业自动化产品系列 LOGO！
工业自动化产品系列 S7-200CN
工业自动化产品系列 S7-1200

人机对话产品 HMI
人机对话界面 K-TP 178、TD400C、
KTP400, KTP600

驱动产品 Drives
多用途的经济型工业变频器：SINAMICS V10
经济型数字驱动：SINAMICS V60

联系我们:
地址： 江苏省南京市江宁经济技术开发区西门子路18 号，211100
电话： 025 5210 1888
传真： 025-5210 1666

联系方式

联系人：招聘组
单位电话：02587119201
主页：ww***com[点击查看]
传真：02552101666
电子邮箱：hr2.snc@
地址：西门子路18号
邮编：211100

如何写一份简单、直接、高效的求职信？-10倍提供求职命中率！