[上海]安捷伦科技（上海）有限公司2011招聘

发布时间：2010-12-28
工作地点：上海
信息来源：上海交通大学就业网
职位类型：全职
职位描述
地址：上海市外高桥保税区英伦路412号

Job Description

Job Title: 2037784 - Product Engineer - Mechanical Engineer

Organization/Department: CAG-ATS/Engineering

Report to: Engineering Operating Manager

Job Level: Intermediate

Job posting: External

Job Description:

Product Engineer takes the product ownership inside supply chain, and is responsible for managing product operation performance, redesigning product to enhance performance, developing manufacturing and test for new product, providing technical support, developing special solution to meet customer needs, and so on.
The primary duties and responsibilities will be:
1. Manage product operation performance: As the product owner in supply chain, product engineer manages the product operation performance(quality, delivery and cost) and leads a cross functional team to drive continuous product performance improvement, which includes
o As the world-wide product quality owner, perform regular analysis on product external quality data (defect on arrival, annual failure, customer feedback& escalation, etc.) and make continuous product quality improvement;
o Manage internal production quality (Turn-on-rate, Line incident, etc.) and ensure right quality system in place.
o Work together with planner, production and procurement engineer to drive delivery performance improvement.
o Work together with procurement team to drive product cost reduction.
2. Redesign product to enhance product performance: As the product technical owner after release, initialize the product redesign to enhance product features, resolve critical quality issues, optimize product cost structure, improve production efficiency, and so on.
3. Develop manufacturing and test for new product: Participate in new product development and responsible for the development of product manufacturing process, assembly fixture/tooling and test system.
4. Provide technical support to day-to-day product issues: As the technical owner, provide technical support to all product related issue, which include customer quality issues, production line trouble shooting, product/part/process change validation, etc.
5. Develop special solutions to meet customer needs: work together with marketing and field people to understand customer special requirement, and develop special solutions for customer.

Requirements:

1. A master or above degree in mechanical engineering.
2. Proved educational and practical knowledge and experience in mechanical design such as tooling, fixture and equipment, etc.
3. Demonstrated proficiency of using mechanical design software such as Solid Works, UG and/or Pro-E,etc to create engineering solution.
4. Excellent analytical problem solving skills.
5. Good data mining skills, strong data driven decision making capability.
6. Demonstrated the abilities to produce useful engineering solutions for assigned problems in an independent and collaborative manner.
7. Thrill to learning new knowledge and skills.
8. Excellent speaking, listening, writing and reading English skill, good reporting and presentation skills.
9. Demonstrated leadership skills and planning capability skills.
10. Demonstrated effective interpersonal skills and interfacing with teams that are both located locally and globally.
11. Good at MS.

Job Description

Job Title: 2036343 -Electronic Engineer (Firmware)

Organization/Department: CAG-ATS/Engineering

Job Description:
1. Assist the engineering management team developing the firmware knowledge transfer and build-up plan. Take the leadership to execute plan to meet or exceed the goal as defined.
2. Learn product firmware knowledge and then proactively apply it to day to day work to drive continuous product and process quality improvement, and production process efficiency increase.
3. Manage the product Firmware lifecycle along with the hardware lifecycle within OF (order fulfillment) to ensure business success.
4. Provide daily production support to ensure the on timely delivery of high quality product. Uses TQC, 6-sigma and DoE methodology to improve productivity of existing testing processes.
5. Participate in New Product Generation project through proactively involving in the new product Firmware developing DFx reviewing process, effectively bridge R&D and mfg engineering to support the needs for test development. Lead the Firmware improvement project to enhance product performance within OF.
6. Lead the firmware transfer process as part of the product transfer project to enable a successful engineering responsibility transfer.
7. Transfer, create and manage product Firmware related documents and information.

Requirements:

Must:
1.Master degree or equivalent in electronic engineering
2.Solid programming skills in C/C# and assembly language.
3.Solid knowledge on both analog and digital electronic circuitry, have circuitry development experience.
4.Excellent skill and knowledge on Firmware and embedded-system development tool such as CodeWarrior
5.Excellent Team Player and communication skills, strong analytical problem solving skills 6.emonstrates effectiveness with interpersonal skills and interfacing with teams both locally and globally
7.Demonstrates the abilities to produce useful engineering solutions for assigned problems in an independent and collaborative manner
8.Strong speaking, listening and written English skills
9.Demonstrate excellent leadership skills and planning skills, open and self-motivated

Want:
1.Global project experience
2.SPC and 6-Sigma knowledge and experience
3.Familiar with DSP and FreeScale ColdFire processor
4.Strong FPGA programming knowledge and experience.
5.RTOS (Real Time Operation System) application experience

Job Description

Job Title: 2036343 -Mechanical Engineer

Organization/Department: Chemical Analysis Group

Job Description:

This is your opportunity to join Agilent Technologies Chemical Analysis Group (CAG) in China Shanghai as a R&D mechanical engineer to play a critical role in new product development project. As a mechanical engineer, you will be part of a high performance project team to design and develop hardware instrument to help customer analyze chemical compounds in different substance.

In this role, you will apply your knowledge of physics, material science and mechanics to design, develop and prove new instrument functions and performance that will enhance analysis sensitivity, increase analysis efficiency, and simplify analysis technique. You will also work with project team to ensure the final product meets all regulations as well as the features that matters customer.

If you want to be part of a global team and work with top talent across the world, Agilent is the place for you. Agilent is a place where people get the chance to work with the latest technology. If you enjoy various technical challenges and collaborating with different discipline leaders, this is the position right for you.

- Create customer mechanical structures to first prove the feasibility, and finally the practicality of the approach being followed to meet the design goals. Produce all documentation required for its fabrication by the service groups.
- Carries out analysis and evaluations of successive version of hardware to ensure that fundamentals are fully understood, basic problems are solved and that the design is sufficiently robust to avoid future problems due to expected variations in component/environmental parameters.
- Assists in integration, evaluation, modification of overall instrument / system. Provide tested functional hardware for same.
- Ensures that all documentation is accomplished and in proper form including any important component specifications.
- Work with manufacturing team to bring new products into production and provide technical supports to maintain production.

Requirements:

- Master degree or PhD in mechanical engineering.
- Strong Knowledge on tolerancing design and part fabrication process.
- Strong thermal design and analysis experience
- Strong Anti-vibration design concept with qualified product delivery experience
- Strong design for manufacturability experience with successful product transfer experience from the prototype to production.
- Solid knowledge in material science and material property.
- Complicated industrial module design experience would be a plus such as EMC design experience for the system with electronic components.
- Strong verbal and written English communication skills.
- Theoretically analyze the system requirement and translate that into design spec.
- Demonstrate flexibility, creativity and initiative to perform successfully in a rapidly changing environment.
- Demonstrate good interpersonal skill and planning capability to achieve result. Ability to communicate needs, plans and achievements at all levels of a corporate organization.
- Demonstrate analytical problem solving skills.

Job Description

Job Title: 2036274 - Software & Data System Mfg Engineer (计算机背景)

Organization/Department: CAG-ATS/Engineering

Report to: Engineering Operating Manager

Job Level: Intermediate

Job posting: External

Job Description:

This Product Engineer (SDME) takes the product ownership inside supply chain for the software and data system, and is responsible for managing product operation performance, redesigning product to enhance performance, developing manufacturing and test process for new products, and providing technical support to ensure day to day business operation to meet customer needs and drive continuous quality improvement, cost reduction and on time delivery etc.

The primary duties and responsibilities will be

Define software and learning product for manufactured products

Define, validate configuration and integration of DataSystem computer solutions

Create Engineering Change Order to implement new/modification of product structure in SAP

Design and create software manufacture loading tool and recovery solution

Plan and schedule production builds with manufacturing vendors

Manage products to full production. Responsible for sustaining, effective, and efficient manufacturing production process

Lead or participate in projects to investigate and implement new manufacturing technologies, processes, and improvement

Plan, lead, and implement DataSystem rollout for LSCA products

Requirements:

1. BS or MS in computer science, engineering, information technology or other related fields

2. Ability to learn very quickly and produce accurate deliverables

3. Strong knowledge in PC and workstation technology, OS, configuration, imaging, deployment, and recovery

4. Good at script programming, DOS and WIL (Windows Interface Language) programming.

5. Excellent Team Player and communication skills, strong analytical problem solving skills

6. Strong speaking, listening and written English skills

7. Demonstrate excellent leadership skills and planning skills, open and self-motivated

8. Good at MS office

Job Description

Job Title: 2034705 -Product Engineer - Firmware Development Engineer

Organization/Department: CAG-ATS/Engineering

Report to: Engineering Operating Manager

Job Level: Intermediate

Job posting: External

Job Description:

This Product Engineer (Firmware) takes the product ownership inside supply chain for the product and mfg process thereof, and is responsible for managing product operation performance, redesigning product to enhance performance, developing manufacturing and test process for new products, and providing technical support to ensure day to day business operation to meet customer needs and drive continuous quality improvement, cost reduction and on time delivery etc.

The primary duties and responsibilities will be

Redesign product to enhance product performance:
As the product technical owner after release, initialize the product redesign to enhance product features, resolve critical quality issues, optimize product cost structure, improve production efficiency, and so on.

Develop manufacturing and test for new product:
Participate in new product development and responsible for the development of product manufacturing process, assembly fixture/tooling and test system.

Provide technical support to day-to-day product issues:
As the technical owner, provide technical support to all product related issue, which include customer quality issues, production line trouble shooting,product/part/process change validation, etc.

Proactively apply firmware knowledge to day to day work to drive continuous product and process quality improvement, and production

Requirements:

1. Master degree or equivalent in electrical and/or electronics engineering

2. At least 1 year work experience in multination company developing firmware for embedded system.

3. Solid programming skills in C/C# and assembly language.

4. Strong FPGA programming knowledge and experience.

5. Excellent skill and knowledge on Firmware and embedded-system development tool such as CodeWarrior

6. Excellent Team Player and communication skills, strong analytical problem solving skills

7. Strong speaking, listening and written English skills

8. Good at MS office

Job Description

Job Title: 2034612 - Test Development Engineer (计算机背景)

Organization/Department: CAG-ATS/Engineering

Report to: Engineering Operating Manager

Job Level: Intermediate

Job posting: External

Job Description:

This Product Engineer () is responsible for the development, enhancement and implementation of various manufacturing software solutions to insure and improve the product quality and production efficiency.

The primary duties and responsibilities will be

Develop test software platform: With a deep understanding of the company product testing strategy, work together with other test engineers as an architect to develop test software platform - a common test program shell solution by using the latest software technologies.

Develop test software for new product: Design test software application for new product. Provide advice and recommendation to NPI (New Product Introduction) team on test development.

Maintain and improve production test software: Analyze the performance, quality and reliability of current test software. Identify improvement opportunities. Recommend new solutions. Plan and implement these solutions to improve test efficiency, utility, quality, and reliability.

Develop production support software: Work with product engineers to develop support software tools to improve production efficiency, quality, reliability and cost.

Requirements:

1. Master degree in computer science or related scientific discipline;

2. Have a deep understanding of Object-oriented concepts in
-Microsoft .Net framework 2.0 or higher
- C# programming
- Windows communication foundation
- XML features

3. Knowledge of web application development with /C# is a plus

4. Knowledge of either electronic or mechanical engineering is a plus

5. Demonstrated strong communication skill in both Chinese and English, leadership skills and planning skills, open and self-motivated

6. Good at MS office

如何写一份简单、直接、高效的求职信？